[siteorigin_widget...
Utah FORGE Modeling & Simulation Forum #11
“Ground acceleration modeling from potential induced seismicity”
Presented by: Chandrakanth Bolisetti (Idaho National Laboratory)
October 20, 2021 at 11 am MDT
Ground motions generated by induced seismicity is an important consideration and design factor for the development of enhanced geothermal systems (EGS) and operations. Typically, ground motions are estimated from empirically based ground motion prediction equations using a moment magnitude and a distance with factors to account for local site conditions and in some cases faulting style. Ground motions specific to a site, recorded or modeled, for the specific site conditions and fault geometries may better inform hazard and risk calculations. Here we demonstrate a deterministic calculation of ground motions from postulated moment magnitudes at the Utah FORGE site using source-to-site earthquake simulations using the finite-element method in the codes, FALCON and MASTODON, developed and maintained at the Idaho National Laboratory. Sample results are presented from these simulations and a plan for future work is discussed.
This is the 11th forum of the series and is intended to have an open format to present modeling and simulation, both completed and planned, as well as activities being conducted by the Utah FORGE Team.
This webinar has been recorded and is available for viewing.
To follow along with the slides, the pdf of the presentation is available for download HERE
For previous forums and for the upcoming schedule check out the Modeling and Simulation FORUM page
Latest News
Modeling and Simulation Forum #5 RECORDING
Utah FORGE Modeling & Simulation Forum #5 "Back Analysis of Injection Tests in Zone 2 on Well 58-32" Presented by: Branko Damjanac (Itasca), Pengju Xing (University of Utah), and John McLennan (University of Utah) October 28 at 11 am MDT During Cycles 4 in Zone 2...
Drilling first deep well announcement
Utah FORGE Drills First of Two Deep Wells The Utah Frontier Observatory for Research in Geothermal Energy (FORGE), is excited to announce that the drilling of its first highly deviated deep well has commenced. Highly deviated wells are frequently drilled for oil and...
At the Core 3rd Edition (October 2020)
Keep up to date on what is going on at Utah FORGE. Read about it in the quarterly newsletter. SUBSCRIBE and receive updates and special announcements. Open and download a pdf version at-the-core-october-2020.PDF