What exactly are the rock types that make up the underground laboratory of Utah FORGE? In this webinar, Dr. Clay Jones describes the geology of the site and surrounding area and the findings from core and cutting analyses of deep wells!
Drilling Completed!!!
Utah FORGE team has successfully completed drilling of its first highly deviated deep well. Drilling was completed 60 days ahead of schedule.
The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The well was deviated at a 65° angle from vertical after reaching a depth of 6000 ft. This angle was maintained for the remainder of the well’s trajectory. The well ultimately reached a true vertical depth of 8,559 feet, and a total measured depth of 10,987 feet. Preliminary measurements indicate temperatures at the “toe” of the well will exceed 442°F (228°C). Approximately 74 ft of core of the granitic and metamorphic rocks that will form the FORGE reservoir was also recovered.
“We are incredibly pleased with the success of the well” said Joseph Moore, Ph.D. and Principal Investigator of Utah FORGE. “It was drilled under complicated conditions and will serve as a prototype for similar wells around the world.”
With this well successfully completed, a series of tests can be run to facilitate the development of the EGS resource. Some of the tests will include determining the stress conditions through short-term injection experiments, during which microseismicity will be carefully monitored. Other tests will allow for the interpretation of the orientation and distribution of the existing and induced fractures in the granite, which will form the pathways for water to circulate and heat up in the newly created EGS reservoir. In the future, a sister well will be drilled to form the basis of an EGS.
About Utah FORGE: The Utah FORGE project is managed by the Energy & Geoscience Institute at the University of Utah. Funding for the project is provided by the U.S. Department of Energy. The FORGE site is located near the town of Milford in Beaver County, Utah, on the western flank of the Mineral Mountains. Near term goals are aimed at perfecting drilling, stimulation, injection-production, and subsurface imaging technologies required to establish and sustain continuous fluid flow and energy transfer from an EGS reservoir.
Open Press Release HERE
Latest Posts
Dr. Kristine Pankow Named GSA 2025–2026 Distinguished Lecturer
Dr. Kristine Pankow of the University of Utah has been named the Geological Society of America’s 2025–2026 Distinguished Lecturer. Her lecture, “Utah FORGE: A Field-Scale Geothermal Laboratory,” will spotlight groundbreaking research at the world’s only dedicated site for advancing Enhanced Geothermal Systems.
Geothermal’s Global Surge: The Top Countries and the Tech Behind the Rise
Geothermal energy is gaining global momentum, with countries like the U.S., Indonesia, and the Philippines leading the way.
A Year in Review 2024
While enjoying the first days of 2025, we’ve taken a moment to reflect on everything that Utah FORGE accomplished during the past year. There’s a lot to be proud of!