The Energy & Geoscience Institute announces Dr. Kristie McLin as Director of Research and Science and new Principal Investigator of the Utah FORGE project, succeeding Dr. Joseph Moore.
Ground motions generated by induced seismicity is an important consideration and design factor for the development of enhanced geothermal systems (EGS) and operations. Typically, ground motions are estimated from empirically based ground motion prediction equations using a moment magnitude and a distance with factors to account for local site conditions and in some cases faulting style. Ground motions specific to a site, recorded or modeled, for the specific site conditions and fault geometries may better inform hazard and risk calculations. Here we demonstrate a deterministic calculation of ground motions from postulated moment magnitudes at the Utah FORGE site using source-to-site earthquake simulations using the finite-element method in the codes, FALCON and MASTODON, developed and maintained at the Idaho National Laboratory. Sample results are presented from these simulations and a plan for future work is discussed.
This is the 11th forum of the series and is intended to have an open format to present modeling and simulation, both completed and planned, as well as activities being conducted by the Utah FORGE Team.
This webinar has been recorded and is available for viewing.
To follow along with the slides, the pdf of the presentation is available for download HERE
For previous forums and for the upcoming schedule check out the Modeling and Simulation FORUM page
The Energy & Geoscience Institute announces Dr. Kristie McLin as Director of Research and Science and new Principal Investigator of the Utah FORGE project, succeeding Dr. Joseph Moore.
Kenya may not be the first country that comes to mind when thinking about geothermal energy, but it leads the world in geothermal electricity production per capita. Sitting atop the geologically active East African Rift System, Kenya has tapped into the Earth’s heat for power, agriculture, industry, and community development—transforming a once-overlooked resource into a cornerstone of its energy future.
The heat beneath our feet flows through the earth in a complex pattern. Utah FORGE is situated in a heat reservoir that has been studied since the 1970s. In this webinar, Dr. Stuart Simmons delves into the unique geologic and geothermal resources found at Utah FORGE and the surrounding area.